SoundPath Tri-Band Wireless Audio Adapter
SoundPath Tri-Band Wireless Audio Adapter
Setup of the SoundPath Tri-Band Wireless Audio Adapter takes minutes. Once installed, it auto-switches between the 2.4 GHz, 5.2 GHz, and 5.8 GHz wireless bands for uninterrupted audio signal transfer. Impervious to interference from Bluetooth, Wi-Fi routers, wireless security systems, cameras, and other wireless devices.
SoundPath Tri-Band Wireless Audio Adapter
Product Overview
Optimized for congested wireless environments, the SVS SoundPath Tri-Band Wireless Audio Adapter expands SVS’ range of full-range wireless audio adapters. In most systems, the more affordable SVS SoundPath Wireless Audio Adapter is sufficient, however, if you have a wireless environment prone to interference from other devices, the Tri-Band version is better suited for pristine signal transfer without interference.
The SVS SoundPath Tri-Band Wireless Audio Adaptor reduces cable clutter without sacrificing performance. Wirelessly connect a subwoofer, stereo zone of powered speakers, powered surround sound speakers, and other components in just minutes. Transmits a full-range (6Hz – 20 kHz) stereo signal up to 130-feet (line-of-sight).
By auto-switching between the 2.4 GHz, 5.2 GHz, and 5.8 GHz wireless bands, the adapter operates flawlessly in the most crowded wireless environments. Uncompromised sound quality, less cable clutter, and no more interference from security cameras, Bluetooth devices, smart TVs, WiFi mesh networks, or other wireless devices.
Quick Specs
- Frequency Response | 6Hz – 20 kHz +/- 0.5 dB
- Operating Frequencies | 2.4 GHz, 5.2GHz, 5.8 GHz
- Transmission Range | 130 feet (line of sight)
- Latency | <19 milliseconds
Instructions for Pairing Additional Receivers
Ohio-based AV professionals provide customer support, product recommendations and set-up advice for every component in your system, 7 days a week, before and after you own SVS.
1-877-626-5623 | Live ChatUser Reviews
Tyler S. Reviews the SoundPath Wireless Audio Adapter
"I use the SoundPath wireless adapter to run my PB-1000 Pro subwoofer. Setup was simple and easy, and it has behaved reliably with no fuss, interference, or ...
Martin M. Reviews the SoundPath Wireless Audio Adapter
"Love, Love, Love the SVS wireless adapter!! I have a difficult room and placing my sub where I wanted would have been hard to run wires."- Martin M.
Press Reviews
Reference Home Theater Reviews the SoundPath Wireless Audio Adapter
"After the short setup is done, there isn’t much to say aside from the fact that the SVS SoundPath Wireless Adapter worked flawlessly. Even in my AV room tha...
SVS SoundPath Tri-Band Wireless Audio Adapter Technical Specs:
Transmitter:
- Analog input level: maximum 2Vrms
- Minimum power: 5V @0.5A
Receiver:
- Analog output level: maximum 1Vrms
- Minimum power requirement: 4.75V @0.3A
Key Specifications:
- Dimensions: W 3.15" (80mm) x D 2.36" (60mm) x H 1.02 (26mm)
- Weight: 1.25 lbs
- Deters against against both in and out of band sources of interference, including: microwaves, wireless cameras, cordless phones, Bluetooth devices and more
- Operates seamlessly alongside 802.11b/g/n Wi-Fi
- Automatic receiver antenna diversity minimizes fading and multi-path effects
- Seamless RF band/channel switching
- RF Band – Tri-Band (auto switching) (2.4/5.2/5.8 GHz) – finds the best solution and connects
- Three RF frequency ranges for each frequency band:
- Band 1: 2400-2483.5MHz
- Band 2: 5150-5250MHz
- Band 3: 5725-5875MHz
- 22 Mbps wireless air data rate
- Sample Rate: 48kHz
- THD+N: -70dB (10Hz – 20kHz)
- S/N: +105dB (10Hz - 20kHz)
- Cross-talk: >75dB @1KHz
- Frequency Response: 6Hz – 20 kHz +/- 0.5 dB
- Audio Latency: < 19ms
- Transmission Range 130’ (line of sight)
Included in the Box:
- Wireless Transmitter
- Wireless Receiver
- Two AC Power Adapters
- Two USB cables for AC power adapter
- Two Mono RCA to Mono RCA cables
- Two Velcro
- Quickstart Guide
Connect Wirelessly With No Compromises
Tri-Band Technology Works Flawlessly in Congested Wireless Environments
Auto-switches between 2.4 GHz, 5.2 GHz, and 5.8 GHz wireless bands to select the most stable channel for uninterrupted audio playback. Highly resistant to interference from Wi-Fi based security cameras, routers, smart TVs, and other wireless devices.
Uncompromised Sound Quality
Passes pristine 16-bit/48KHz audio signal up to 130-feet with no noticeable delay.
Eliminates Audio Cable Clutter
Streamlines home theater system setup by removing the need for long or complicated audio cables running along floors or walls.
True Stereo Signal
Left/Right stereo signal transfer unlocks wireless connectivity for one or more subwoofers, 2-channel zone of powered speakers, amplifiers, powered surround speakers, and more.
Full-Range Wireless Connectivity
Transmits the complete audible frequency spectrum (6Hz to 20kHz, +/-0.5 dB), providing a full-range wireless audio solution for subwoofers, powered speakers, and more. Great for adding additional zones to create single source multi-zone audio system.
Expands Placement Options
Adds wireless connectivity, giving you more flexibility when placing subwoofers, powered speakers, and other audio components in a room. All without sacrificing performance.
Quick and Easy 3-Minute Setup
The transmitter and receiver come pre-paired, and setup takes only minutes:
- Connect the transmitter to an AV receiver, TV or other audio source via RCA
- Connect the receiver to a subwoofer, powered speaker, power amplifier, or other line level devices
- Make sure both the transmitter and receiver are receiving power (through included wall adapter or USB source)
- Wait a few seconds for the adapters to sync and you’re ready
- Up to three receivers can be paired to one transmitter to create a multi-room distributed audio system or for use with multiple powered subwoofers or speakers
Which SVS SoundPath Wireless Audio Adapter is right for me?
For the vast majority of users, the standard SVS SoundPath Wireless Audio Adapter works flawlessly to wirelessly connect your subwoofers, powered speakers, or other devices.
There are a few scenarios where the SVS SoundPath Tri-Band Wireless Audio Adapter is a better option in your home theater or audio system.
- When multiple wireless devices (microwaves, cordless phones, Bluetooth devices, etc) are all operating in close proximity.
- When you’ve experienced interference in the past from routers, smart appliances, and more.
- When connecting it to another wireless device like SVS Prime Wireless Powered Speakers, which have WiFi and Bluetooth streaming capabilities.
- When the subwoofer or powered speakers are further than 60-feet (line-of-sight) away from the transmitter.
Enter your speakers and the SVS Subwoofer Matching Tool will recommend suitable subwoofer matches as well as crossover frequency and low pass filter settings.
Personal SVS speaker and subwoofer system builder. Choose from preset home theater surround sound set-ups like 5.1, or custom build your own.
User Reviews | Press Reviews
- Reviews
- Questions
Wireless adapter
Works great. Resolved the popping I was experiencing with the Martin Logan adapter. I’m very pleased even though a bit pricey.
USTri-Band works great
Bought two of the SoundPath Wireless Adapters for my new SB 3000s that I could not wire directly. However, they did not work (kept loosing lock) so I contacted SVS and decided to try the Tri-Band. SVS saved me some money by recommending one transmitter and two receivers. The Tri-Band arrived and after getting both receivers in sync worked great. Love the two subs with the Tri-Band.
USSoundPath Tri-Band Wireless Audio Adapter
Flawess signals. Had a prior unit from another manufacturer that was constantly dropping out. Have had no drop-outs with the SVS unit. Worth every penny!
US USSoundPath Tri-Band wireless audio adapters
SoundPath Tri-Band wireless audio adapters work great. Even though the receiver unit and SoundBase amplifier are located in close proximity to other wireless connectivity, including cordless phone stations, there is no signal interference. The sound quality has been very impressive with great signal clarity. I had to call SVS Customer Support for some help with the initial set-up, and was advised to re-calibrate my Audyssey surround settings, which did the trick! The service support provided was excellent.
User Reviews | Press Reviews
Reference Home Theater Reviews the SoundPath Wireless Audio Adapter
"After the short setup is done, there isn’t much to say aside from the fact that the SVS SoundPath Wireless Adapter worked flawlessly. Even in my AV room that is...
You May Also Like...
Sound Experts Articles
5 Ways to Improve the Sound of Your TV
Which Sounds Better, Vinyl or Digital Music?
